Installing New ATV Tires on Rims: A Step-by-Step Guide

If you own an ATV, you know how important it is to have the right tires for optimal performance. Over time, your ATV tires will wear down and need to be replaced. Installing new ATV tires on rims can be a daunting task, but with the right tools and knowledge, you can do it yourself. In this step-by-step guide, we will walk you through the process of putting new ATV tires on rims.

The first step in installing new ATV tires on rims is to gather all the necessary tools and materials. You will need a tire iron, a bead breaker, a tire mounting machine, and of course, your new ATV tires and rims. Make sure you have a clean and well-lit workspace to work in, as this will make the process much easier.

Once you have all your tools and materials ready, the next step is to remove the old tires from the rims. Start by using the bead breaker to loosen the tire from the rim. Once the tire is loose, use the tire iron to pry the tire off the rim. Be careful not to damage the rim during this process.

After you have removed the old tires from the rims, it’s time to install the new ATV tires. Start by lubricating the beads of the new tires with tire mounting lubricant. This will make it easier to slide the tires onto the rims. Place the new tire onto the rim, making sure that the bead is seated properly.

Once the new tire is in place, it’s time to inflate the tire. Use a tire mounting machine to inflate the tire to the recommended pressure. Be sure to check the manufacturer’s guidelines for the correct tire pressure for your ATV.

After the tire is inflated, it’s time to seat the bead. This can be done by using a tire mounting machine or by using a ratchet strap. Place the strap around the circumference of the tire and tighten it until the bead seats properly. Be sure to check that the bead is seated evenly around the rim.

Once the bead is seated, it’s time to balance the tire. This can be done using a tire balancing machine. Place the tire on the machine and spin it to check for any imbalances. Add weights as needed to balance the tire properly.

After the tire is balanced, it’s time to mount the tire back onto the ATV. Use the tire iron to slide the tire onto the rim, making sure that the bead is seated properly. Inflate the tire to the recommended pressure and check for any leaks.

Congratulations! You have successfully installed new ATV tires on rims. With the right tools and knowledge, you can save time and money by doing this task yourself. Remember to always follow the manufacturer’s guidelines for tire pressure and maintenance to ensure optimal performance of your ATV.